Porter-Cable FCN200 2" Flooring Cleat Nailer
from Porter-Cable.
This is a great must have tool for DIY wood floors. While every company that's in the tool business seems to make a nailer (Senco, Bostitch, etc.), what sets the Porter-Cable apart is it's balance and civilized look. The look doesn't matter, but if you don't want to mar the wood floors by having a...
Porter-Cable FR350 Round Head Framing Nailer Kit
from Porter-Cable.
...I have several projects lined up around the house over the next 12 months. One is a 350 sq ft deck extension and the others involve substantial interior framing. After picking up a great Cambell Hausfeld compressor, a framing nailer seemed the next most obvious tool. I completed significant...
Porter-Cable BN200V12 Cordless 18-Gauge Brad Nailer Kit
from Porter-Cable.
I don't do a whole lot of heavy duty nailing. This nailer is convenient and maintains a good charge (about 2 hours with a medium charge/1 hour with a quick charge) for a medium job. I put up a knotty pine ceiling, trim, and molding with no trouble. Because this product was cordless, the job was very...
Porter-Cable CFBN200A 2" 18 Gauge Brad Nailer/Compressor Combo Pack
from Porter-Cable.
I purchased this kit because I had a ton of baseboard molding to replace. This included everything I needed in one convenient package and is perfectly sized for my needs. I have used it for molding installation and have purchased two additional nailers to use with the compressor: a framing nailer...
DeWalt D51845 Full Round Head Framing Nailer
from DeWalt.
I purchased this nailer because it had some features that my Porter Cable did not. Tools free depth adjustment and the rafter hook. Right out of the box the tool leaked air from the back end. I tested it anyway and it felt pretty good except that the trigger is too far away from the handle and it...
Hitachi NV65AH Siding Coil Nailer
from Hitachi.
This nailer is like a german sports car. It's got power, performance and handles like a dream. The single most important feature for a good siding nailer is the ability to accurately dial in the depth that the nails are driven. For cedar, or cement board siding the depth of drive is crucial. This...
Senco FP25XP 5/8" to 2-1/8" Brad Nailer
from Senco.
I bought the Senco 25 brad nailer last week. The decision between the Porter Cable and the Senco was difficult, I finally based the purchased on the wider range of brad lengths for the Senco and the oil less design . I have used them both and operation between the two is very similar. The Senco is...
Bostitch MIIIFN Industrial Flooring Cleat Nailer
from Bostitch.
This air stapler was a life saver. I laid about 1900 square feet in my new house without one misfire. That was just over 20000 staples. The staples held very well and if I had it to do over again, I wouldn't change a thing. This air gun is well worth the money! It took me approximately 18 hours in...
Hitachi NT65MA 1-1/4"-2-1/2" 15 Gauge Angled Finish Nailer with Air Duster
from Hitachi.
I currently run four Hitachi, three Senco, and two Max finish nailers. The Hitachi NT65MA is the best nailer I have. It is very light with minimal recoil. It has enough power to sink nails in maple effortlessly. It is stone cold reliable- it has never broken a driver after four years of fulltime...
Porta-Nails 401P Porta-Nailer Hardwood Floor Nailer
from Porta-Nails.
The old way of a hammer, chisel, and finish nailer dont even compare. What I could do in an hour the old way I can do in 15 min with this tool. It really does pull bent wood straight and tight! Calculate what you make on a flooring job and figure you could have finished at least another similar...
Porter-Cable FR350MAG 3-1/2" Magnesium Round Head Framing Nailer
from Porter-Cable.
I gave this nailer four stars because it doesn't come with a case, and I don't think Porter Cable even makes an aftermarket case. Also, the depth of drive adjustment is not the greatest. That being said, this is a fine framing nailer and is lighter then most. I really like the way nails are loaded...
Porter-Cable PIN100 23-Gauge Pin Nailer Kit
from Porter-Cable.
i used two other "major" companys pin nailer and was content w/ them both ...."was".... now i own a p.c. pinner and its been worth every dollar i spent...
Paslode 500970 T250-F16 Finish Nailer
from Paslode.
...I got to be good with it too, I could take it down like the video shows you an clean & oil it in my sleep. In the end though I did not feel it was convenient enough, for the cost of their aerosol spray and short fuel cells. Concerning the pneumatic one however, some at the job site ...
Hitachi NV45AB Coil Roofing Nailer
from Hitachi.
I own a roofing company in Michigan and for the past 6 years we have been using Hitachi roofing guns. The best thing about them is they are very durable. They have survived many falls, one from 4 storeis up onto a concrete slab and the only thing wrong with it was the top needed to be tightened back...
Bostitch RN45B-1H30 Coil Roofing Nailer with Free Hammer Stapler
from Stanley.
This has been a very reliable nailer for me. It make easy work of putting on a roof. It is light weight, and nails quickly.
Porter-Cable BN200A 18 Gauge, 2" Brad Nailer Kit
from Porter-Cable.
In addition to the features listed for this nailer, I discovered that it will also shoot 5/8" brads. With this much flexibility, it's really an all-in-one tool. If I could find 1/2" 18 ga. brads, I think it would shoot them as well. I have a lot of respect for Porter-Cable and hope this doesn't make...
Porter-Cable PN650 Palm Nailer Kit
from Porter-Cable.
I had to replace the plate/seal around the bottom of my house due to termite damage. The palm nailer made it a breeze to nail the floor joices back into the the new plate. I was working in a very tight spot with electrical wires and plumbing pipes running right in front of where I needed to nail. I...
Hitachi NV45AB2 Roofing Nailer
from Hitachi.
the roofing nails went all the way in and the wood didn't split...
Porter-Cable FN250B 16-Gauge, 2-1/2" Finish Nailer Kit
from Porter-Cable.
This is the first power nailer Iv'e used....it beats the heck out of a hammer!! ..but the "sights" are sloppy and the blows are very inconsistant, seems to hit heavy and light on the same setting.
Bostitch N88RH-1BAG High Power Round Head Stick Framing Nailer with Free Carrying Bag
from Bostitch.
I hesitated purchasing this nailer because of one review hear on Amazon.com. After researching more, I decided to give it a go. My experience was:
1) Nails easy to find in my area (find out what is more commong in your area, clipped head or round head)
2) No misfires/jams. Not a single one...
Bostitch N88WW-1BAG High Power Stick Framing Nailer with Free Carrying Bag
from Bostitch.
This nailgun is my first and I have been very pleased with it. I have been helping to build a log style house and have used it to nail everything. I have run #12, #10, and #8 nails thru it. The only problem I have had was a bad batch of nails. We got to looking at the nails and found that the nails...
Porter-Cable DA250B 15-Gauge, 2-1/2" Angle Nailer Kit
from Porter-Cable.
I purchased the DA250A in May 2002, I have already returned one due to a broken part, and now in October I am going to have to replace the driver blade. This nailer has good power, and the balance is fairly good. I don't feel that this nailer will stand up to frequent use on the job site. I have...
Paslode 900600 Impulse Angle Finish Nailer
from Paslode.
We own several different Paslode nail guns, including the framing nailer and the straight finish nailer. We began using the Paslode products about 4 years ago. I will say that the new guns we have purchased in the last few months are significantly better than the quality of the guns purchased just a...
Senco SFN40K 15-Gauge Finish Nailer with Case
from Senco.
I purchased my Senco SFN40 about 4 years ago. I also purchased their SLP20 18 gauge brad nailer. Prior to that time, I owned a Bostitch N60. As a trim carpenter, my nailers are used on a daily basis. Their Neverlube design eliminates oil exhaust spray and I don't have to be bothered toting oil...
Paslode 900420 Impulse Cordless Framing Nailer
from Paslode.
When me and my brother in law decided to build my house, I started looking for something to help us out. Neither one of us ever owned any kind of nail gun or phneumatic tools. I asked around and read the reviews on your web site.
DeWalt D51238K 18-Gauge Brad Nailer Kit
from DeWalt.
I bought a DeWalt nail gun near the end of last year. Since then I've driven several boxes of nails with it, mostly without any hitches. I've used it nearly every day for building cabinets and installing mouldings. This is my third brad nailer. My first one was a Senco SLP20, a fabulous gun. I never...
Paslode 900400 Trimpulse Solid State Finish Nailer
from Paslode.
The paslode trimpulse is a good tool but with any cordless tool there are always some trade-offs! I own 1 Trimpulse, two Bammer models and an older model Paslode Impulse. The Bammer models have turned out to be the better buy in not only price. The paslode trimpulse and impulse both work well with...
Porter-Cable CPFFC350 3-1/2" Clipped Head Framing Nailer and 3 HP Compressor Kit
from Porter-Cable.
This is a great package. I have built a large addition and used this gun for the entire project. I had no problem driving nails flush through engineered laminated beams, not the case with a Senco nailer which had trouble with this material. A great deal for the occasional user.
